Contact Us
NATIONAL SALES HOTLINE：13585011595
0510-85503992
0510-85503992
Tel：0510-85503992
Fax：0510-85503992
Sales hotline：13585011595
Contacts：Zhou jian xing
E-mail： [email protected]
[email protected]
Add：Qinxin industrial Fields,Binhu Dist,Wuxi City,Jiang su
Chemical storage tank is a kind of storage tank. In terms of relevant learning and understanding, what else is not involved? This question, its answer, will be developed and carried out through some specific questions below, and give its correct answer, so that everyone can have a clear understanding and understanding, and at the same time, it can also deepen the familiarity with the chemical tank product.
1. Is the price of PE chemical storage tank higher than that of ordinary FRP anticorrosive storage tank?
The main advantage of PE chemical storage tank is that it can resist acid, alkali, rust, corrosion, and chemical reaction, and it is food grade. Therefore, its quality is smaller than that of ordinary FRP anticorrosive tank, but its price is slightly higher.
2. Is it necessary to check the chemical storage tank during its use? In addition, what are the specific contents of this kind of tank overhaul?
In the process of using chemical storage tank, it is necessary to carry out its inspection work, but also to take it seriously and carry out it, because this is also to avoid some mechanical failures, so as to affect the use of storage tank, or cause serious consequences. At the same time, it can also effectively ensure the service life of chemical tanks.
The overhaul of chemical storage tank is generally carried out once a year in the cycle. In the specific content, it includes dripping, leaking, emitting and cleaning, as well as the dredging and cleaning of the inlet and outlet and drain valve in the tank. In addition, the fire arrestor in the safety valve should be vented to ensure its normal use.
3. How is the 50 cubic anti-corrosion chemical storage tank made?
The concrete operation of the 50 cubic anti-corrosion chemical storage tank is to make the carbon steel tank first, and then weld a diamond steel mesh on its inner surface. Then, PE is used as the raw material, and the rolling molding process is used for the overall one-time molding, so that the tank can be effectively formed, and the finished product can be obtained.
