What is the mounting height of the welding roller carrier wheel?

The vertical distance between the caster and the bottom edge of the welding roller frame is installed. Generally, the installation height of the rubber wheel of the welding roller frame is the distance between the center of the wheel and the ground.

The style of the bracket directly affects the installation of the roller. The installation height of the caster and the height of the support rod should be calculated during the calculation. If the bracket is a flat plate, the height from the flat plate to the ground is the installation height. Turning is the height from the axis distance of the bracket to the radius of the wheel bearing, which is the actual height.

The main component of the roller frame rubber wheel is polyurethane compound. After being pressed under high pressure, because there is a certain elastic material in itself, unstable deformation will occur after finalization, and stability can only be maintained after the stable period. Therefore, when designing the caster of roller frame, it is necessary to carry out precise calculation and consider comprehensive factors, otherwise, the caster will appear different sizes, resulting in the increase of defective rate.